Many SunPass customers prefer the SunPass Mini, even though it no longer works after it is removed from the traveler's windshield.
Choose location for SunPass Mini from the picture shown below
Clean the preferred SunPass Mini mounting location
Peel off backing (make sure to remove all the air bubbles from under your Mini or it may not work as designed)
The SunPass PRO is now easier than ever to install on the inside of your vehicle's windshield due to the attached suction cups.
Choose location for SunPass PRO from the picture below
Clean the preferred SunPass PRO mounting location
Press your SunPass PRO against the windshield to enable the suction cups to stick. Transponder must be placed a minimum of 2 inches below the windshield frame. If the windshield has a solar strip, install the transponder at least 2 inches below the strip.
Each suction cup has a “tab” that can be lifted to facilitate the removal of your SunPass PRO.
Subscribe to our Newsletter
Receive the latest News and Updates from Tampa Hillsborough Expressway Authority